How to quickly troubleshoot print quality problems : Low Country Printer Repair
LowCountry Laser LLC
843-224-3751
HomePrinter Repair BlogProductsServices

How to quickly troubleshoot print quality problems

by Kevin Dutton on 03/17/13


Print quality issues are the most misdiagnosed issues I encounter. Often a service call
can be prevented by the customer by just taking 5-10 minutes to troubleshoot the
printers themselves. Here are a few steps you can take before calling us.

BLACK PRINTERS

1. Make sure the printer is plugged directly into the wall and not UPS.
2. Have you replaced any consumables in the printer recently? If you have and that is
    when the problem started, then maybe you should replace it again with another           new one or an old one.
3. Pull out the toner cartridge(s) and inspect the drum for marks. If you have another
    toner cartridge, replace it to see if the problem persist. If you don't have a new
    cartridge, try a old or empty one. Or just borrow one from another printer.
4. Look into the cavity in which you removed the toner and inspect the rollers and
    paper path for excess toner or debris. Be careful not to touch any rollers or drums
    with you fingers. Use a clean cloth or towel to wipe inside.

COLOR PRINTERS
5. Perform steps 1 and 2.
6. If the problem is involving more than one color then look at the transfer belt. The
    problem could be a fuser issue, but for most customers this would be the time to         call us.
7. Perform steps 4 and 5.
8. If the problem appears to be an alignment(or focus) problem, then run a                     "Calibration" if it available on your model. If none these steps fix your issue, then         call us and we can take it from there. You can feel safe that you have done all that       you can do.

Comments (0)


Leave a comment